Browse all practice questions for the Damage Control Assistant Senior Enlisted (DCASE) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Damage Control Assistant Senior Enlisted (DCASE) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • How often are audits of the welder/brazing qualification program required?
  • Before undocking, hull board inspections should include which of the following?
  • What is the DC closure log?
  • In nondestructive testing, what does PT stand for when describing a dye-based method?
  • Negative GM is listed as a condition that can cause what?
  • Which of the following is NOT listed as a condition that can cause a ship to take on a permanent list?
  • What are the 3 plotting techniques?
  • Which of the following items is included in the DCPO's equipment responsibilities within divisional spaces?
  • Which item is part of the DCPO's equipment responsibilities?
  • GQ readiness is described as which of the following?
  • When does responsibility of the ship transfer during docking?
  • Which of the following is a pathogen type that starts with the letter V?
  • Which method is used to isolate ruptures in the firemain system?
  • How are ships and the DC organization trained to handle personnel casualties?
  • What is CT?
  • Which of the following should investigators look for during compartment inspections?
  • What is the purpose of the Smoke Ejection System?
  • What is the purpose of the R&A detail?
  • The CVN designation in this context refers to what type of ship?
  • Which frequency is associated with welder qualification program audits?
  • What is the purpose of rapid casualty plotting in damage control operations?
  • Which type of draft mark is used to determine displacement?
  • What is a docking report and who prepares it?
  • What are the two categories of biological agents?
  • What is the recommended practice when testing watertight fittings to ensure safety?
  • To whom does the DCPO report?
  • The two digits for DCUL/DCUPS refer to which identifiers?
  • Where are CCOL master copies kept, and who maintains the software/disk?
  • Which of the following is NOT a direct fire fighting method?
  • What methods can be used to investigate watertight fittings?
  • Blister agents in the respiratory tract cause which effect?
  • Which item is part of the DCPO's equipment responsibilities?
  • GFEP training should include which of the following?
  • Discharge pressure at the FP is higher than the design pressure, what action should be taken?
  • How often is welding requalification required and what must be passed?
  • Which of the following is part of the DCPO's equipment responsibilities?
  • Which items are included in the DC Closure log?
  • Which of the following is a category of toxins?
  • Which term describes the point at which buoyant forces are considered to act upward for small heel angles?
  • Flow rate at the FP is higher than the design flow rating, what action should be taken?
  • Which NDT method uses sound waves to measure thickness?
  • Describe rapid plotting symbology and how it is used during casualties.
  • Free Surface Effect occurs under which condition?
  • Who is responsible for developing the docking plan?
  • Which circuit supports communications for subordinate control?
  • Which spaces are manned during docking?
  • How are LCF and CT related?
  • Negative ventilation is achieved by which configuration?
  • Which statement correctly describes the typical trim design for ships and its effect on power plant efficiency?
  • Maintenance records are kept IAW which directive and system?
  • Which toxin category is associated with toxins from bacteria?
  • In the open head sprinkler configuration, what happens when the system is activated?
  • Freeboard provides a rough measure of what?
  • Positive ventilation is defined as which configuration?
  • By what means do maintenance personnel report maintenance requirements?
  • In addition to extending the investigation, what other step is recommended when assessing for hidden damage?
  • Which item is NOT listed as a scene leader role?
  • Divers are used in docking to perform which purpose?
  • What should be investigated when an underwater explosion occurs alongside or close aboard the ship?
  • Which code corresponds to the captain's battle circuit?
  • Which of the following is NOT a type of shipboard ventilation?
  • Which toxin category includes toxins associated with algae?
  • What is the 3M program?
  • Which point represents the location where all buoyant forces may be considered to act in a vertical upward direction?
  • What is a step to activate Halon?
  • For how long is the Gas Free Engineer Log maintained after a specific job?
  • What is the most widely used method of corrosion control?
  • In DCRS subdivisions, what does B designate?
  • Which organization maintains DC, Firefighting and CBRN-D AELs?
  • DCUL is associated with which function?
  • What is the purpose of the firemain system?
  • How are training records maintained?
  • The axis about which a ship tilts through the waterline center is known as what?
  • Who designates the source switchboard and riser?
  • What is the purpose of buddy aid?
  • During compartment inspections, investigators should look for which of the following as a potential finding?
  • Which of the following is NOT a pathogen type listed?
  • Which of the following is a design feature of the casualty power system?
  • How are maintenance records maintained?
  • Which IVCS circuit provides communications for subordinate control?
  • What is a Fleet COSAL FBR used for?
  • Which point is the line through which the weight of the ship's structure and contained load acts vertically downward?
  • What does White indicate on the Flooding Effect Diagram?
  • Which weight movement does the cosine correction curve address?
  • Which term describes the point through which the weight of the entire ship's structure and contained load acts vertically downward?
  • Which action best describes the scene leader’s role in terms of attack planning?
  • Which item is part of the DCPO's equipment responsibilities?
  • What PPE are investigators required to wear?
  • Which of the following is NOT listed as affecting the dispersal of agents?
  • On the Flooding Effect Diagram, what does Yellow indicate?
  • What is the correct order of active desmoking steps?
  • Which items constitute the main components of a message?
  • Which reference established the basic guidelines for the corrosion prevention and control program?
  • Which statement best describes the minimum criteria for the initial welder qualification?
  • What are the reference points for keel, center of gravity, center of buoyancy, and metacenter?
  • How are AEL records maintained?
  • At 3 PPM, what action should be taken according to precautions for HFP?
  • Which item is part of the DCPO's equipment responsibilities?
  • What action is taken if a leak is reported during flooding of the dry dock?
  • What condition can cause a firemain fault?
  • Which method is used to determine or observe if the ship has incurred further damage after preliminary investigation?
  • What term describes the intersection of two or more successive lines of buoyancy as the ship heels through small angles?
  • What are DC plates and how are they used during casualties?
  • Initial stability is described as reflecting the size of the ship's righting arms at small angles. What is the typical heel angle range for these small angles?
  • As part of initial actions after grounding, what is determined to guide corrective actions?
  • What chapter of the RPM is related to casualty power?
  • After underwater hull penetration, the investigation should be extended to how far from the point of impact?
  • Which item is a pathogen type that appears in the six listed types?
  • Which of the following is a pathogen?
  • Which information is included in the Welder's file?
  • In an explosion what spaces must be included when investigating for hidden damage?
  • Where are copies of the DC book stored besides the central DCC?
  • DCRS 5 is associated with which system?
  • In DCRS subdivisions, what does F designate?
  • DCRS 1 may be divided between which departments?
  • During docking, hull board inspections include noting which item?
  • Which reference is associated with corrosion guidance for ships and bears the designation VI?
  • Which option best describes the information included in a DC Comms bill?
  • When is the underwater hull report performed?
  • What is included in the R&A detail’s mission besides rescuing personnel from the water?
  • The initial qualification can be achieved by passing A school or which NEC code?
  • Free Communication Effect occurs under which condition?
  • How many types of pathogens are listed in the material?
  • Which item is part of the DCPO's equipment responsibilities?
  • Which of the following is an item listed in the DC Closure log?
  • DCRS 2 corresponds to which area?
  • Which term best represents the maximum readiness level in DC operations?
  • How can testing of fuel and potable water indicate the presence of flooding?
  • Which item is part of the DCPO's equipment responsibilities?
  • DCRS 1 refers to which area?
  • Which of the following is a condition for Free Communication Effect to exist?
  • Which item is part of the DCPO's equipment responsibilities?
  • Which term describes the method that uses magnetic particles to reveal surface flaws?
  • Which item is part of the DCPO's equipment responsibilities?
  • Which of the following items is the DCPO responsible for within divisional spaces?
  • Which of the following is NOT a type of APC nozzle?
  • Which item is included in the DC Closure log?
  • Which NDT method uses conductive materials to detect surface and subsurface flaws?
  • How does trim factor into ship design?
  • Manning for RRT is defined as what?
  • As the ship heels, the metacenter moves relative to the center of buoyancy and center of gravity in which manner?
  • Which category describes the physical form of a chemical agent?
  • What must be done to the ship's propellers, rudders, and projecting devices before entering dry dock?
  • Which phrase may require permission to use?
  • When is the leakage report submitted?
  • Nerve agent symptoms include which of the following?
  • What is LCF?
  • What methods can be used to determine if a space is flooded that do not require opening a watertight closure?
  • DCRS 6 corresponds to which function?
  • Which NDT method uses iron sprinkles to indicate imperfections?
  • What is the function of the primary IVCS circuit?
  • When conducting sounding what symptoms will indicate flooding?
  • DCUPS is smaller than DCRS for which purpose?
  • Which IVCS circuit consists of circuits not included above?
  • Which circuit includes circuits not listed above?
  • Which item is listed as a toxin category associated with animals?
  • Which symptom is a direct indication of flooding during sounding?
  • DCRS 4 corresponds to which ship location?
  • Which of the following is a characteristic that determines the suitability of pathogens?
  • Who nominates the DCPO?
  • Soft caps are described as forming the top of the keel and side blocks and have what thickness?
  • What precautions should be taken when investigating flooding?
  • How many direct fire fighting method types are listed?
  • What is the captain's battle circuit?
  • What are the initial requirements for GFE?
  • DCC personnel are responsible for providing what type of diagrams or schematics?
  • What is the time limit for continuous operation for the water mist system supply tank?
  • Which type of draft mark indicates the operating draft?
  • Who updates and prepares the DC book, and where are its copies maintained?
  • Initial DC actions following a grounding include which action?
  • Which category refers to the time between exposure and onset of symptoms?
  • DCRS 7 corresponds to which area?
  • Which statement describes the quarterly requalification assessment?
  • What is the Gas Free Engineer Log and how is it maintained?
  • Which reference provides specific guidance for inspection, prevention and repair of corrosion onboard ships?
  • What is Freeboard?
  • Which statement best describes the overall design approach for casualty power features?
  • What does the quarterly requalification consist of?
  • What information is included in a DC Comms bill?
  • When investigation for structural damage what areas should be included in the investigation?
  • One of the tasks performed by DCC personnel is to receive and evaluate information.
  • How far should you pull the Carbon Dioxide system control head cable handle?
  • Which of the following is NOT a category used to classify chemical agents?
  • Which statement best describes the design features of the casualty power system?
  • What is the primary connection between the DCO and control/repair stations?
  • What is the Righting Arm?
  • Which item is included in the DCPO's equipment responsibilities within divisional spaces?
  • When is the DC watch log not required?
  • Which step comes last in the desmoking sequence?
  • Which point is defined as the intersection of buoyancy lines as the hull heels through small angles?
  • What is the optimal time frame to rig active desmoking and determine its effectiveness?
  • What AELs are maintained by the DCA?
  • Manning for GQ is defined as what?
  • Which draft mark type would you consult to calculate displacement?
  • Which of the following is a pathogen type that starts with the letter F?
  • Open head sprinklers vs close head sprinklers: what is the difference when activated?
  • Which reference outlines the duties of a DCPO?
  • If there is a penetration of the underwater hull, what is the primary procedure for investigating hidden damage?
  • What are CCOLs and what is their purpose?
  • Which NDT method uses X-ray to show imperfections?
  • Which type of draft mark shows the minimum allowable freeboard and maximum depth?
  • Who is responsible for establishing casualty power route?
  • Which NDT method uses visual inspection to check for proper joint design and surface defects?
  • What immediate action should investigators take when a casualty has been detected?
  • What does Pink indicate on the Flooding Effect Diagram?
  • Which IVCS circuit provides alternate communications for select stations?
  • Which NDT method uses dye and developer to indicate imperfections?
  • Which of the following is NOT a type of APC nozzle?
  • What is the purpose of setting GQ/Zebra?
  • Which category refers to the duration of the chemical agent's effects?
  • Manning for Cond II requires which assets?
  • Which method is suitable for determining whether a space is flooded without opening a watertight closure?
  • What happens if the trimming moment becomes greater than the max longitudinal righting moment?
  • In DCRS designations, what does P designate?
  • Which DC bills are maintained in the DC library?
  • Who is responsible for maintaining the auditable file for each welder?
  • A trimming moment can affect stability by changing which of the following?
  • Which toxin category is associated with toxins from plants?
  • Where are AEL records stored for ready inventory?
  • Which toxin category is associated with toxins produced by plants?
  • Which item is included in the welder's file?
  • For precautions related to HFP, what action is recommended when exposure reaches 90 PPM?
  • Which NDT method is denoted by the abbreviation VT?
  • Which NDT technique uses magnetic fields to detect defects in ferromagnetic materials?
  • Who supervises casualty training according to the material?
  • Which spaces should be included when investigating for hidden damage after an underwater explosion?
  • If normal comms are damaged, which circuit provides emergency communications?
  • What is the main purpose of Ordnance Casualty Control?
  • DCRS 3 corresponds to which ship location?
  • What is the purpose of the DCREL?
  • What is the maximum continuous operation time for the water mist system supply tank?
  • Which log is issued for each confined space that is inspected or tested?
  • Which IVCS circuit allows emergency communications in the event of damage to other comms?
  • Which weight movement does the sine correction curve address?
  • What database is used to document coating system inspections, maintenance and repairs?
  • Which type of draft mark is used to maintain reserve buoyancy?
  • DCC personnel perform which of the following communication tasks?
  • Which term is NOT part of the DC organization's three-tier concept?
  • How many categories are used to classify chemical agents?
  • As part of the initial DC actions following grounding, investigators are sent to survey damage and flooding. Which option reflects this action?
  • What does Green indicate on the Flooding Effect Diagram?
  • Which category describes how a chemical agent enters the body?
  • Which item is listed as a military use category?
  • Which method is used to bypass ruptures in the firemain system?
  • Which of the following is a design feature of the casualty power system?
  • Which statement correctly describes the Fleet COSAL FBR?
  • What does the underwater hull report consist of?
  • Which step comes second in the desmoking sequence?
  • What DC library resource is useful to help inventory and identify?
  • Which draft mark type is used to indicate the minimum freeboard and maximum depth?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy